Now I am ready to fill and glass the bottom and then jig up the rest of the entire hull. It is so hot!!!! and humid!
Thursday, July 26, 2012
Small update, got the bottom glassed and flipped over
Just a small update. I got the entire inside of the bottom of the boat fiberglassed in with 10 ounce cloth, and few coats of epoxy. Then I had a few friends and family help to flip it over. (Thanks to Todd, Derek, John, Brenda and Tommy!)
Now I am ready to fill and glass the bottom and then jig up the rest of the entire hull. It is so hot!!!! and humid!
Wood supports clamped on to stiffen and get something to hold on while moving and flipping over!
After it was flipped over
Next up, filling the keel seam and finishing the bottom.
Now I am ready to fill and glass the bottom and then jig up the rest of the entire hull. It is so hot!!!! and humid!
Subscribe to:
Post Comments (Atom)
Looks real good Jim, your going real fast. I will now crack open a cold Heineken in recognition of your progress - heres to you Jim Stancil
ReplyDelete